bing tracking image
Q & A Icon

How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper  

Question:

I need both hubs for the above camper. Fleetwood Destiny Parts list says the hub part # is 4738D0451 Seal # 4714A2201 bearing and race pkg # 4716-1101 Axle shaft is 1 1/16inch dia. 7/8inch of thread then 3 1/4inch to lip which is 1 1/2inch dia by 1/2inch long It is a 5 Lug 4.5 on ctr Hub has markings of HA 908 and G4 1492 Gross camper weight is 1875# Axle tag says 1800# will your part number AKIHUB-545-2-1K work?

0

Expert Reply:

To select a set of replacement idler hubs for your Fleetwood Destiny trailer you want to match up a few characteristics from your originals. These include the axle weight capacity, wheel bolt pattern and the bearing set used in the hubs. A replacement hub must use the same inner and outer bearings as the original in order for it to fit on your spindles.

The linked page displays 5-on-4-1/2-inch bolt pattern idler hubs for 2K axles. Hub # AKIHUB-545-2-1K works with wheel diameters from 8- to 12-inches and uses bearing L44643 as both its inner and outer bearing. The linked photo shows you the usual appearance of bearing numbers.

expert reply by:
0
click to enlarge
click to enlarge

Alex S.

7/16/2020

Just looking to see what size wheel bearings I need for my 98 Coleman pop-up tent trailer Fleetwood Casa Grande

Etrailer Expert

Chris R.

7/21/2020

Trailer manufacturers don't do a great job of making this kind of information available, so I'm not able to track down what bearings the hubs on your Coleman Pop-Up use. You will need to pull one of the hubs and check the existing inner and outer bearings - there should be numbers stamped inside of them. If you can let me know these numbers I will be happy to recommend the right replacements.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>