Adapter Needed to Install Older Thule Pull Top Ski Carrier on 2015 Subaru Outback

Question

Question:

I have a 2015 Subaru Outback wagon with factory roof cross bars. I would like to put my older 6pr pull top ski rack in but need clamps. Can you tell what I need to order?

asked by: Kelly D

0

Expert Reply:

For your older Thule Pull Top carrier the part # TH7520970001 will replace what you currently have and allow the rack to fit on the factory bars of your 2015 Subaru Outback.

expert reply by: Jameson C

0

Answer 1

The Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers #7521241001 or the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks #TH7520970001 will be compatible with the aero style bar. Either of…

view full answer...

Answer 2

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Answer 3

You'd want the shorter 13 mm Speedlink you referenced for your Thule Snowpack with the part #7521241001 that you referenced.

view full answer...

Answer 4

All you need to attach the Thule Snowpack to a non Thule bar would be the SpeedLink Mounting Hardware Assembly #7521241001. This will be all you need unless you have square bars. If you have square bars you will need the Thule SquareBar Adapter…

view full answer...

Answer 5

Yes the replacement clamp part #7521241001 would easily fit on a crossbar that measures 67 by 23 mm. It attaches by wrapping around the bar with the strap that is on the bottom of the clamp.

view full answer...

Answer 6

The C36 is a discontinued mounting bracket which was used on the Thule 724/725 ski carriers. The Mounting Kit #7533998 is designed to fit these carriers and will fit your roof crossbars on your 2017 Toyota Highlander.

view full answer...

Answer 7

I reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier #7521241002 and the 13 mm #7521241001 is the length of that center bolt/screw. You…

view full answer...

Answer 8

I spoke with a representative from Thule and I was informed that you would have to alter your Thule Flat Top to make the Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier, part #7521241001, fit your…

view full answer...

Answer 9

Yes, the Thule One-Key System Lock Cylinders part #TH450400 will work inside the Thule SpeedLink Mounting Hardware Assembly part #7521241001.

view full answer...

Answer 10

The kit needed for converting a Thule Pull Top to fit a set of aero style crossbars is the part #TH7520970001.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Adapter Needed to Install Older Thule Pull Top Ski Carrier on 2015 Subaru Outback

Product Page this Question was Asked From

Continue Researching