What is the Difference Between Lippert Components JTs Strong Arm LC191024 and LC191025

Question

Question:

Whats the difference between the two models: LC191024 and LC191025 Thanks!

asked by: Spencer W

0

Expert Reply:

Lippert Components JT's Strong Arm # LC191025 is designed for use with travel trailers whereas # LC191024 is designed for 5th wheel trailers with less than 58 inches between the landing gear jacks.

expert reply by: Michael H

0

Answer 1

In order to add the under bed pucks to your 2019 Ford F-250 you can use the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part #RP87FR which is the same kit that would have came on the truck from the factory if…

view full answer...

Answer 2

Yes, the Dometic RV Water Heater part #DMC74FR would be a direct replacement for a Atwood Water Heater GC6AA-9E. No modifications, just hook everything up as normal.

view full answer...

Answer 3

I took a look at how you can power your Thomas Payne Seismic Recliners, using the: -Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas #195-000111, you will need to plug one end of the power cord into a…

view full answer...

Answer 4

The 9" Round Foot Pad #LC314667 is actually meant to be used to replace rectangular 5th wheel RV landing gear foot pads. Since most rear foot pads connect to a round tube you are probably going to need part #LC377962 instead.

view full answer...

Answer 5

The only difference between the JT's Strong Arm Jack Stabilizer Kit #LC191023 and #LC191025 is that #LC191023 is deigned for 5th wheel RV's that have 58" or more between the front landing gear legs, while #LC191025 is designed to be used…

view full answer...

Answer 6

You will have to do some measuring. Take a look at our Double-Eye Trailer Suspension article (see link). I have also linked a picture of a shackle link showing where to measure. Measurements for replacement 1) Measure current shackle from center of…

view full answer...

Answer 7

While we do have an option for you, MORryde has told us the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer #MR72AR should not be used with auto leveling landing gear. So what you would need instead, that is confirmed to work with your electric…

view full answer...

Answer 8

I highly recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV for hauling and towing with your 2024 Ford F-250 Super Duty. This kit offers up to 7,500 lbs of support so you'll get the most out of a suspension…

view full answer...

Answer 9

The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…

view full answer...

Answer 10

Due to the winch's fairlead being built into the main winch mount on your 2017 Ram 2500 Power Wagon it appears the only front mounted receiver you can use is the Curt #C31015 since it will mount below the bumper. The EcoHitch #306-X7900 would hit…

view full answer...

Answer 11

The front brackets of the Lippert Components JT's Strong Arm Jack Stabilizer #LC191024 that you referenced actually attach to either of the landing gear legs at the front of the trailer. You would not install them to the frame.

view full answer...

Answer 12

Hey Guy, we have a Curt front hitch that fits your 2018 Ram 2500 Power Wagon with the part #C31015 but the part number you mentioned is for RV bumpers. See attached picture.

view full answer...

What is the Difference Between Lippert Components JTs Strong Arm LC191024 and LC191025

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching