Available Extra-Long 5th Wheel Hitch Mounting Pins  

I went out to the warehouse and pulled a set of the Hidden Hitch fifth wheel replacement pins #6014 that you referenced and the measurement from the inner edge of the clip grove to the bend in the pin is 3-1/4 inches. This measurement is what is…

The B&W Patriot 5th Wheel Trailer Hitch part #BWRVK3200 for 16K or part #BWRVK3270 for 18K is the what I recommend for a 2016 GMC Sierra 2500 6-1/2' Bed. They are made in the USA and come with a lifetime warranty. They also have 3/4'…

Yes. The Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches and Gooseneck Adapters - Qty 4, #C16902, will fit your universal base rails and adapter frame. They are industry standard size pins and clips.

I would say your 14-year-old Reese 5th wheel hitch has done its duty for you, lasting over the course of three trailers! That's pretty good. You obviously took very good care of it. But a new 5th wheel hitch will likely have additional features…

If you are installing the B&W Patriot #BWRVK3200 in your 2015 Ford F-250 Super Duty using industry-standard rails such as #BWRVK2401 then you would only need standard, 3-1/4" long, 1/2" diameter pins such as #6014. I've added a link…

To install the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200 in your 2003 Chevy Silverado 3500 the best option is the B&W Custom Installation Kit w/ Base Rails #BWRVK2500 because it will not require drilling into your truck's frame rails…

My contact at B and W has informed me that the Patriot 5th Wheel is compatible with Sidewinder pin boxes. He also tells me that the wedge on the underside of the Reese Revolution pin box (both the universal and hitch specific wedges) are compatible…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…