What is the Mounting Hole Spacing on Curt Trailer Hitch C13333

Question

Question:

What is the distance between the mounting holes on the backside of the receiver? I want to ensure those holes will align to the holes on my tubed framing before purchase. Thank you.

asked by: Tim

0

Expert Reply:

I went out to the warehouse to measure the hole spacing on Curt trailer hitch # 13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles:

2004 - 2014 Dodge Ram Pickup 1500 Series, without factory hitch
2003 - 2003 Dodge Ram Pickup 1500 Series, without factory hitch - built After 11/1/02
2003 - 2013 Dodge Ram Pickup 2500 and 3500 Series, without factory hitch
2010 - 2013 Ram 3500 Pickup, without factory hitch
2010 - 2017 Ram 1500 without factory hitch
2010 - 2013 Ram 2500 without factory hitch

expert reply by: Michael H

0

click to enlarge

Answer 1

The only rubber mats that we currently carry for a 2012 Ram 1500 are from DeeZee and would both require a bit of trimming in order to fit with your Ram Boxes. If you have a 5-1/2' bed then you would need part #DZ86996 and for a 6-1/2' bed…

view full answer...

Answer 2

If you are looking at a mat that only fits your 2013 Dodge Ram 1500 with the RamBox, like the Access #A25040199 for a 5-1/2 foot bed, then it is made to fit the RamBox bed and does not have the cutouts.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

view full answer...

Answer 7

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Answer 8

Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 #LHLR103 or 9/16"-18 #LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not necessary and more so just…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

We have talked to Roadmaster about this before and their item #RM-2460 Roadmaster Comfort Ride Shock Absorbers will work with your MORryde LRE 4100 suspension system. The only requirement is that you have the 3" diameter axles these are designed…

view full answer...

Answer 11

Hello Walt. We do have snow plow kits that will fit your 2006 Chevy Trailblazer 4x4. The #SS78GV you were looking at will fit, you just will need to install the front hitch #31055.

view full answer...

What is the Mounting Hole Spacing on Curt Trailer Hitch C13333

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching