Can I Lift A Trailer With Torsion-Axle Rubber Ride Suspension?

Question

Question:

Id like to purchase a Dexter Axle Lift Kit. I found the following in my manual: The Dexter optional lift kit will raise the RV approximately 2”. Check with your RV dealer to see if the lift kit can be added aftermarket on your RV not available on all models. I went back to the brochure for my 2008 Jayco Jay Feather Sport 218 and found the axle is a TorFlex independent torsion-axle rubber ride suspension system. Can you point me in the direction of the correct lift kit. Will I notice a difference in how the trailer handles?

asked by: Tim

0

Expert Reply:

We have two lift kit options for Dexter Axles. We have the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift # K71-724-02 for number 11 axles or # K71-725-02 for number 12 axles. This will lift your trailer by that specified amount by raising your trailer frame.

Either kit will raise your center of gravity slightly, which will change a little of the feel of the trailer, but it won't make a huge difference in handling.

expert reply by: Jason S

0

Answer 1

A 235/75R15 size tire will mount to a 15 inch wheel that features a width range of 6 to 8.50 inches. With this in mind, the Dexstar Steel Mini Mod Trailer Wheel #AM20545 that you referenced should work nicely with your off-road tires, as it features…

view full answer...

Answer 2

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

view full answer...

Answer 3

There are torsion axles that the spindle can be changed out on but most most do not allow for this. That said, if you need a new spindle this would be a great time to upgrade to an axle-less system, the Timbren Axle-Less Trailer Suspension like part…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…

view full answer...

Answer 6

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 7

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

view full answer...

Answer 8

To identify the type of Dexter Torflex axle you have on your trailer, there should be a tag or plate located somewhere on the axle itself that lists the part number and weight capacity. The weight capacity should be a good indication of what type of…

view full answer...

Answer 9

To lift your 2018 Winnebago Micro Minnie 2106FBS with tandem 3500lb Lippert torsion axles need the Axle Riser Kit - Single Diamond Torsion Axle - 3-1/2" Lift #LC270682 if your axles have the diamond axle tube, or #LC382741 if you axles have the…

view full answer...

Answer 10

There are lift kits for Dexter #9 through #12 Torflex axles. On the axle tag there should be an indication of which axle you have. Lift kit #K71-707-02 that you mentioned is for Dexter Torflex axles rated from 2,300 pounds to 4,000 pounds. Your 2018…

view full answer...

Answer 11

I would be happy to! The most common lift kit is an over-under kit which moves the axles on your 2017 Winnebago Micro Minnie Travel Trailer from on top of the leaf springs to underneath. Doing this raises the trailer by the diameter of the axle plus…

view full answer...

Answer 12

I believe the issue regarding why a 2017 Winnebago Micro Minnie can't have its axle flipped is because it has torsion axles, which do require what are essentially spacers but are called a lift kit. The correct lift kit is going to depend on your…

view full answer...

Can I Lift A Trailer With Torsion-Axle Rubber Ride Suspension?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching