Question:
will this hitch 24756 fit a cobalt coupe
asked by: Daniel L
Expert Reply:
If your 2009 Chevrolet Cobalt is not an SS then you would want a Draw-Tite Trailer Hitch, part # 24745. I attached installation instructions as well as a link to a video of this hitch being installed on a similar vehicle as yours below. If your Cobalt is an SS then you could use a Draw-Tite Hitch, part # 24756, like you referenced. I attached installation instructions and a video of this hitch being installed on a vehicle that is similar to yours below also. You may also be interested in purchasing the following: T-One Vehicle Wiring Harness, part # 118407, (instructions and video below) Hitch Ball with 1-7/8 inch Diameter and Short Shank, part # 19256 Hitch Ball with 2 inch Diameter and Short Shank, part # 19258 Sportframe Drawbar 4 inch Rise, part # 3594
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"