bing tracking image
Q & A Icon

Mounting Measurements for Lippert Manual Pull-Out Step LC432690


Have a 07 keystone Montana Currently has org 3 step manual pull down step. Want to replace same. Need distance at fasten point and length of side plates


Helpful Expert Reply:

For Lippert Manual Pull-Out Step # LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other measurements.

click to enlarge
click to enlarge
helpful expert reply by:

Product Page this Question was Asked From

Follow up Questions

Garth J.
You show monting holes on the top of unit being 7 inches on center. My steps monted on the side to plates welded on trailer frame. These monting holes are 4.5 inches on center. Are these the correvt steps ir my set up?
Etrailer Expert
Reply from Chris R.

The mounting holes won't line up if the holes on your existing brackets are 4-1/2" on center, but you just could drill new ones if the two brackets themselves are still spaced apart by 27-1/2" or replace them with new outriggers if not, part # LC301704 .

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>