bing tracking image
Q & A Icon

Ball Mount to Clear Rear Bumper on 2013 Toyota Sienna and Provide Close to 7 Inch Rise  

Question:

I got a 2013 Toyota Sienna with a Curt receiver installed. According to my measurements, I need a 2inch hitch with 7inch of space between the center of the hitch pin hole and the edge of the supporting gusset to clear the bumper for the required 7inch rise. Is there such a hitch available?

1

Helpful Expert Reply:

Based on your measurements getting exactly what you need is a little tricky but I have some possible options for you. I can get you close to the rise you need by using ball mount # D-28, which has a 4 inch rise, with hi rise ball # C40034 or # C40032, both of these balls offer another 2 inches of height for a total rise of 6 inches. The tongue weight of the trailer will pull it down a little so at most you would be off level by 1 inch.

expert reply by:
1

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>