What are the Dimensions of the Convert-A-Ball Pintle Hook Combo # PH1
Question:
What are the mounting hole centers left to right and up/down and what is the measurement of from the bottom mounting hole to the bottom of the ball mount stud as well as the distance from back of mounting plate to the utmost rearward facing point and /or rate of declination please. THANK YOU FOR YOUR RESPONSE I\-I- I \ I I \ ? What are these dimensions I ? I this being the side-view I \ I L?-\-I
asked by: Dale
Expert Reply:
The left to right mounting holes on Convert-A-Ball Pintle Hook Combo, # PH1, are 3.375 inches apart, center to center. Top to bottom they are 1-3/4 inches apart center to center. From the bottom of the bottom mounting hole to the bottom most part of the assembly is 2-7/8 inches. From the top, back of the mounting plate downward to the bottom corner of the front it measures 7-1/2 inches (diagonally).
The mounting plate is 4 inches tall by 5 inches wide. From the top of the loop to the bottom of the ball mount nut is 9-5/16 inches. From the top of the loop to the top of the mounting plates is 3-1/2 inches.
Product Page this Question was Asked From
Convert-A-Ball Pintle Hook Combo with 3 Stainless Steel Balls - Bolt On - 25,000 lbs
- Pintle Hitch
- Pintle Hook - Ball Combo
- Three Ball
- 25000 lbs GTW
- Bumper Mount
- Plate Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- No Shank
- Convert-A-Ball
more information >
Similar Expert Q&A Pages
- Compatibility of 2-1/2-Inch Diameter Lunette Ring with Convert-A-Ball Pintle Hook Combo PH1
- Hitch Mounting Plate Compatible with Convert-A-Ball Pintle Hook Combo
- Recommended Pintle Hook Hitch Ball Combo And Adjustable Height Mounting Plate For 2006 Jeep Liberty
- Recommended Pintle Hook -Ball Combo For Use With Rectangular Ball Receiver
- Pintle and Hitch Ball Combo Hook Recommendation
- Is There Other Brand Pintle Hook 106B Can Work With
- Adjustable Pintle Hitch With Quick Change Balls
- Slack When Towing with Convert-A-Ball Pintle Hook Combo
- Is it Normal for Pintle Hook Towing Setup to Make Noise When Starting/Stopping
- What Size Bolts are Used to Mount Convert-A-Ball Pintle Hook Combo # PH1
- Recommended Pintle Hook Mounting Plate for 2-1/2 Inch Trailer Hitch Receiver
- Pintle and All Three Hitch Ball Size Ball Mount Availability
- Replacement Shank For The Convert-A-Ball Pintle Hook Combo Part # PH1
- Adjustable 3 Ball Mount With Pintle Hitch For a 2-1/2" Receiver
- Pintle Hitch Ball Mount Rated for Over 20,000 Pounds for 2-1/2 Inch Trailer Hitch
- Recommended Pintle Hitch/Hitch Ball Combination For 20,000 lbs. Towing Capacity
- 2 5/16' Bolt On Pintle Hitch with the Highest Capacity
- Recommended Pintle Hitch Made with USA Steel
- Ball Mount with Pintle Attachment, 2 Inch Ball, and 2-5/16 Inch Ball
- Pintle Hook Multi-Ball Combo Mount for 2-1/2-Inch Hitch on 2018 Chevrolet Silverado 3500
- Compatibility of Pro Series Adjustable Pintle Hook 63072 with Convert-A-Ball Pintle Hook Combo PH1
- What Amount of Drop is Provided by Convert-A-Ball Cushioned Pintle Mount for 2-Inch Hitches # AMPC3
- Can Gen-Y Receiver Plate # 325-GH-724 be Mounted Only Using the Top 4 Holes
- Hitch Ball Solution that Allows Use of all Three Hitch Ball Sizes
- Recommended Hitch and Pintle Setup for Use with 2" Hitch Ball on 2019 Ford F-250
- Replacement Sleeve for Convert-A-Ball Pintle Hook Combo
- Which Convert a Ball Ball Mounts Does Replacement Pintle Sleeve PS Fit
- Is there a Convert a Ball Hitch with Pintle Hook and 2 inch ball Capabilities Available?