How to Get a Ball Mount with 0 inches of Rise or Drop
Question:
I am looking for a 2x2 ball mount, with 0 rise, in black.
asked by: John
0
Expert Reply:
In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part # D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part # C40034.
I attached links to FAQ articles on ball mounts and hitch balls below for you to check out also.
expert reply by: Jameson C
0
Products Referenced in This Question
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- Class III
- 7500 lbs GTW
- CURT
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- What do you Recommend for a Class 3 Cushioned Ball Mount Rated for 7,500 lbs. Without a Rise
- Does Ball Mount Have To Place Trailer Ball Exactly Level
- How to Order a Ball Mount for 0 inches of Rise/Drop
- How Long is CURT Ball Mount # D-4 Versus a Standard Length Ball Mount
- Hitch Ball Recommendation for Curt D-4 Trailer Hitch Ball Mount
- Recommended Aluminum Ball Mount w/ 8,000 lbs Capacity
- Recommended Ball Mount That Will Work With Shank Mounted Bike Rack
- Which Trailer Hitch For a 2007 Toyota Sienna LE will Give Me the Most Ground Clearance
- Will I have to Reduce the Weight Capacity on My Receiver If using an Extended Ball Mount?
- Trailer Hitch Recommendation for a 2004 Lexus RX330
- Ball Mount Recommendation for Use with a Draw-Tite # 75673 on a 2010 Subaru Outback Wagon
- Will Longer Ball Mount Increase Turning Clearance for Small Trailer When Backing Up?
- Will The Buyers Products Black Receiver Tube 6 Receiver Tube Extend The Receiver 6
- Correct Ball Mount for 2002 Ford Explorer Towing Trailer with 20 Inch Coupler Height
- 2 Inch Ball Mount Recommendation for a 2011 Toyota 4Runner Towing a 19 ft Boat Trailer
- Ball Mount Recommendation For Use with Curt Clamp-On 3 Bike Towing Rack
- Recommended Trailer Hitch For Allego 35 Ft Motorhome To Tow Enclosed Trailer
- Long Ball Mount Recommendation for a 2011 Suzuki Grand Vitara and 2013 Rockwood A122S
- Can Longer Ball Mount be Used to Attach Ball Mount Mudflaps on a 2011 GMC Acadia
- Long and Short Ball Mount Options for a 2012 Toyota RAV4 Towing a Boat and Boat Trailer