Replacement Velcro For Access Tonneau Cover On 2012 Ford F-150

Question

Question:

I hace an access cover on my 2012 f150 and the velcro appears to b worn out and the wind is constantly under the cover. Do you sell replacement velcro for this product. Thanks,

asked by: Randy M

0

Expert Reply:

We have the Velcro you need for your Access Tonneau cover for your 2012 F-150.

For the hook portion that installs on the top rail you can use part # A60270 for the 17-ft long and 1-inch wide, and part # A30474 for the 17-ft long strip that is 1-1/2 inch wide.

If you need the 1-1/4 inch wide adhesive strip, you can use part # A20790. This is 16-ft long.

expert reply by: Jeffrey L

0

Answer 1

The best way to pick out replacement velcro strips for a tonneau cover is first determining the brand and model of the cover that you have and then going by what the manufacturer offers as a replacement. The part #A60270 that you referenced is the…

view full answer...

Answer 2

I recommend Replacement Velcro strip for original roll up Access Tonneau Covers part #A30474. The strip is 17 feet long and 1-1/2 inches wide. You can cut the strip to fit the length of your short bed on the 2014 Ford F-250. The strip comes with the…

view full answer...

Answer 3

We have the part #A30474 which is a 1-1/2 inch wide Velcro strip replacement for Access tonneau covers like what you have. The overall length is 17 feet but is designed to be cut down to size as needed.

view full answer...

Answer 4

The only difference between the Access Replacement Velcro Strips #A30474 and #A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

view full answer...

Answer 5

I reached out to my contact at Access and the replacement cover is #A22020191. The replacement Velcro for the frame is the Replacement Velcro Strip for Access Tonneau Covers - 1" x 17' #A60270.

view full answer...

Answer 6

Replacement Velcro strip #A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the replacement…

view full answer...

Answer 7

The correct replacement Velcro for the Access Vanish tonneau covers is part #A60270.

view full answer...

Answer 8

Replacement Truxedo Shur-Bond Velcro Brand Fastener #TX1117876 is the same 1 inch width and it is the hook portion only just like #A60270 which is the Access replacement part. So it will fit its just that the 2 parts, the Tonneau cover and strip,…

view full answer...

Answer 9

The Replacement Adhesive Velcro Strip #A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct. We do not carry Lund tonneau covers or their replacement parts so while I…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Velcro For Access Tonneau Cover On 2012 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching