Bolt Pattern and Shipping Weight of Trailer Brake Assembly for 3,500 Pound Axles
Question:
Hi Folks, Can you please tell me the spacing of the four studs in the backing plate? Also the shipping weight. Cheers
asked by: Steve M
0
Expert Reply:
The bolt hole pattern for the brake assembly # AKEBRK-35L is 2-7/8 by 2-7/8 inches. I've linked a diagram of the flange the brake will install on with the same pattern. The shipping weight is 9 pounds.
This is the left hand brake, if you also need the right hand the part number is # AKEBRK-35R
click to enlarge
expert reply by: Charles S
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Can Electric Brakes Be Put on a Boat Trailer
- Replacement Dexter Brake Assemblies for 023-027-00 and 023-026-00
- Replacement Drum Brakes and Hubs for 3500-lb AL-KO Axles
- How to Choose the Correct Brake Assembly for Trailer Axles
- Replacement Parts for Dexter Brakes 10 Inch by 1-1/2 Inch
- Electric Trailer Brake Assemblies to Fit 10x2-1/4 Inch Dexter Drum
- Does etrailer Axle Teknology 10-Inch Brake Assembly AKEBRK-35L Include Trailer Wiring
- Testing the Amperage Draw of Trailer Brake Magnets
- Mounting Hardware for etrailer.com Electric Brake Assembly # AKEBRK-35L
- Replacing Old 3 Bolt Trailer Brake Assembly on 3500 lb Axle
- Can Electric Brakes be Used on a Boat Trailer
- How To Tell The Difference From Right and Left Electric Brake Assemblies
- Recommended Replacement and Upgrade For AL-KO 10x1-3/4 Electric Brakes
- Troubleshooting Trailer Brakes Locking Up
- What Bolt Pattern Mounting Flange is Electric Trailer Brake Assembly # AKEBRK-35L Designed to Fit
- Are Trailer Brake Magnets Polarity Sensitive
- Troubleshooting Electric Trailer Brakes That Only Work in Reverse
- Where are the Ground Wires Located on Electric Trailer Brakes
- Replacement Brake Magnets for 10 Inch Brakes on 3500 Pound Trailer Axles
- Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- How To Determine Which Electric Brakes Will Fit On A 6x12 Utility Trailer Without Any Brakes
- How to Determine if Trailer Brake Magnets/Brake Assemblies and Hub and Drums Need to Be Replaced
- Replacement Hub/Drum Recommendation for 1996 Coachmen Catalina
- How to Wire a Trailer with Electric Brakes to a 1995 Ford F-150
- Replacement Brake Assembly Recommendation for a 2006 Fleetwood Mallard Trailer