bing tracking image
Q & A Icon

Spring Bar Availability for Equalizer Weight Distribution with Just Head and Shank


I have an equilizer weight distribution hitch. I dont have the sway bars. All I have is the ball mount hitch part. Is there a way to buy the addition bars seperate without buying entire unit.


Expert Reply:

If you have the head and shank already of an Equal-i-zer system you can piece together the rest of the kit. You will need a snap up lever part # EQ95-01-6050 if you do not have one of them yet.

Now to pick out bars is going to be based on the tongue weight of your trailer. We have several sets. The capacity listed for them is the max tongue they are designed for. Ideally your tongue weight will fall right in the middle of the range of a set so you'd want your tongue weight to be a couple hundred lower than the ratings for the kits listed below.

For a set rated for 1,000 lbs tongue weight we have the part # EP90-01-1099, for a 1,200 lb kit we have the part # EQ90-01-1299, for a 600 lb kit we have the part # EQ90-01-0699. I attached a link to a page that has all of the rest of the bar sizes as well.

If you need frame brackets you'd want the part # EQ95-01-5600 too.

expert reply by:
Jameson C

Products Referenced in This Question

Video/Article/FAQ this Question was Asked From

Article or Video