bing tracking image
Q & A Icon

Replacement Manual Pull-Out Steps for a 2011 Four Winds Breeze Travel Trailer


Do you mind if I ask for your assistance, When I measure the distance width between the top mounting holes, I get pretty close to 25 1/2inch center to center. Will either of these steps work and which one would you recommend if so. I am replacing the factory 24inch two step system for a 24foot Four Winds Breeze pull trailer 2011. I like the idea of the 350 lb one as a friend of ours was too heavy for the steps we have, but will use which ever you think will work best. Would sure appreciate your in-put! Thank you, Terri Flexco Manual Pull-Out Steps for RVs - Double - 7-7/8inch Drop/Rise - 24inch Wide - 350 lbs Item # SMFP-2100 Lippert Manual Pull-Out Step for RVs - Double - 7inch Drop/Rise - 24inch Wide - Steel - 300 lbs Item # LC432682


Expert Reply:

Looking at the picture of your existing steps it appears they are attached on the sides rather than at the top of the steps. If that is the case then Lippert steps # LC432682 could work because the overall width of these steps is 25-1/4 inches. So they can bolt up in place of the ones you have.

Step set # SMFP-2100 would be too wide for this.

click to enlarge
expert reply by:

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>