How to Pick Out Roof Vent Lid Cover for 2013 Rockwood 2503

Question:

follow up, is the front roof vent replacement cover lid door a 14inch or a 14 1/4inch or a 14 1/2inch .... I removed the inside trim and measured the actual opening and it was 14 1/inch

asked by: Mike

Expert Reply:

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.

If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

expert reply by: Jameson C