bing tracking image
Q & A Icon

Optoins for Longer Ball Mounts  

Question:

HI, im looking for a coupler that will give me an extra 6 inches between the trailer and tow vehicle. currently my coupler is 12inch from the flat back side to the center of the ball. id ideally like a 16 or 18inch to the center of the ball. can you point me in the right direction?

0

Expert Reply:

We have a couple pretty long ball mounts for you to check out.

The overall length of part # D-26 is 16-1/2 inches. The distance from the center of the hitch pin hole to the back of the ball mount plate is 8-1/4 inches and to the horizontal plane of the ball mount plate it is 10-1/2 inches.

The Brophy # BH20 has a distance from the center of the hitch pin hole to the center of the ball hole is 13-1/4 inches.

I have attached photos of each of these ball mounts with the dimensions shown you can check out.

Both of these ball mounts use a hitch ball with a 1-inch shank. For a 2-inch diameter ball I recommend part # 63845. for a 1-7/8 inch ball I recommend part # 19260.

expert reply by:
0
Jameson C
click to enlarge
click to enlarge

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>