How to Pick Out Replacement Bearings for 2007 Suntracker
Question:
What is the number on the hub bearings inner and outer
asked by: Jim B
1
Helpful Expert Reply:
I really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solution I have for you would be to remove the hubs and get the numbers that are stamped on the bearing or for you to remove the hubs and use a digital or dial caliper to measure where the bearings and seal ride (see pic).
With that info I can help you figure out what you need.
expert reply by:
Jameson C
1
click to enlarge
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Will Firestone Air Bags Interfere if I Install a B&W Gooseneck Trailer Hitch for a 2004 Dodge 2500
- Q&A: Fit of Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1313 with my 2006 Dodge 3500 8 Foot Bed
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Q&A: Replacement Hub Assembly And Drum Brake For My Dexter 8-407 4.4K Axle
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Calculating Portable Generator Power Needs
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle