Recommended Autosliding Hitch For 2014 Chevy Silverado 2500 HD With 6-1/2 Foot Bed  

Hey Thomas, so B and W does have a fifth wheel hitch that fits the Reese above bed rails you have in the bed of your truck but the Companion that you mentioned does not as it only fits into B and W Turnoverball gooseneck hitches. So instead what you…

In your 5-1/2-foot short bed 2016 Ram 1500 you cannot use your Pro Series slider hitch because it will not provide enough turning clearance for your 5th wheel. You can use the hitch in the truck (always keeping it in its forward locked position) only…

To add a set of industry standard rails to your 2023 GMC Sierra 3500 you will want the Curt Fifth Wheel Installation Kit item #C16429-204. This kit fits the 8' foot or long bed Sierra's. This kit is custom fit and bolts to your Sierra's…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

Yes, your B&W Patriot 5th wheel trailer hitch will fit installation kit #RP50074-58 for your 2017 Ford F-250. The hitch fits industry standard above the bed rails and that is what is included in the Reese installation kit so you will be good to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.