Trailer Wiring 4-Way Recommendation for 2017 Toyota Highlander  

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

If you already have the 4-Way wiring harness installed on your 2017 Toyota Highlander, than all you will need to do is install the Universal Installation Kit #ETBC7. If you do not already have a 4-Way at the rear of your Highlander, and if you have…

To add a 7-Way connector to your 2017 Toyota Highlander which already has a 4-Way installed you will just need a few parts. First for the 7-Way you can use #37185. This will add the 7-Way and retain the 4-Way should you need it. If your trailer does…

The particular parts you need to install a fully-functioning 7-Way on your 2019 Toyota Highlander Hybrid will depend on what exactly it's already equipped with. Either way you will need to start by adding a 4-Way connector harness. If your…

For your 2017 Toyota Highlander XLE Hybrid the hitch I recommend is the USA-made etrailer 2-inch model #e98844 because it is compatible with your hybrid and because it offers easier no-drill installation than some of the other options. It is also…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…