Install Instructions for Draw Tite Trailer Hitch 76170 for 2018 Honda Odyssey

Question

Question:

Im looking to purchase a trailer hitch for a 2018 Honda Odyssey. I believe the hitch I need is the Draw Tite Item # 76170. Is it possible to view the installation instructions before I purchase? I dont see a link anywhere on the product page for this. Thank you.

asked by: Robert C

0

Expert Reply:

For your 2018 Honda Odyssey the Draw Tite hitch part # 76170 is a confirmed fit.

I attached a picture that shows the install instructions for this hitch for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The single biggest difference between Draw-Tite trailer hitch #76170 and the etrailer hitch #e98855 for the 2018 Honda Odyssey is visibility. With Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #76170, which is the…

view full answer...

Answer 2

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR is…

view full answer...

Answer 3

Typically (at least up until now) the biggest benefit of a factory trailer hitch was that they tended to have a more hidden design, thus providing an overall cleaner appearance at the rear of the vehicle for a "from-the-factory" look. The…

view full answer...

Answer 4

For your 2022 Honda Odyssey I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #76170. From what we have found this hitch is the least visible. It has a concealed cross tube so you will only see the receiver hanging down below…

view full answer...

Answer 5

The trailer hitch with the most ground clearance for your 2020 Honda Odyssey is the Draw-Tite trailer hitch part #76170. The receiver tube is the only thing visible once it is installed, so it gives you additional clearance and a cleaner look. The…

view full answer...

Answer 6

Yes, there is a trailer hitch receiver that fits your 2024 Honda Odyssey, from Curt, at the following part number: - Curt Trailer Hitch Receiver #C64NR I verified this fit directly with the manufacturer for you.

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver #C64NR is included on etrailer.com and does fit the 2022 Honda Odyssey.

view full answer...

Answer 8

For a trailer hitch confirmed as a fit for your 2018 Honda Odyssey the part #C13370 is a confirmed fit and would work well for towing or carrying a cargo carrier like you mentioned. Since this is a 2-inch hitch receiver, you will have a wide variety…

view full answer...

Answer 9

The most hidden trailer hitch we have for your 2020 Honda Odyssey is the Draw Tite part #76170. Only the hitch opening hangs below the rear bumper so you only see the hitch opening. This also helps with ground clearance. I attached a picture that…

view full answer...

Answer 10

The best class III hitch that will give you the highest ground clearance on your 2022 Honda Odyssey is the Draw-Tite Max-Frame #76170, which will give you approximately 12 inches of clearance under the receiver tube.

view full answer...

Answer 11

The difference between the Curt #C56382 and the Tekonsha T-One #118753 for your 2018 Honda Odyssey is that the Curt is for if the fuse locations actually have pins in them. The Tekonsha option is for if the fuse locations are lacking the pins to…

view full answer...

Answer 12

Both the Tekonsha T-One Vehicle Wiring Harness #118781 and the Curt #C56382 T-Connector are custom harnesses designed specifically for your 2020 Odyssey, and will plug into the same factory port behind the driver side trim panel. In terms of function…

view full answer...

Install Instructions for Draw Tite Trailer Hitch 76170 for 2018 Honda Odyssey

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching