bing tracking image
Q & A Icon

How To Replace The Roof Vent Cover On The Ventline Ventadome Trailer Roof Vent # V2110SP-24


I broke the white cover and got a replacement cover from my local dealer. I got it home but dont see how I can get the cover to go high enough to get it off. what is the steps to replace just the cover Thanks


Expert Reply:

I walked out to our warehouse and pulled the Ventline Ventadome Trailer Roof Vent, part # V2110SP-24, and had to disassemble the vent to remove to vent cover.

To start, open the vent as much as possible. Then hold the knob in place while you loosen the screw in the center of the knob with a Phillips-head screwdriver. After removing the knob, you will need to use a square-bit screwdriver head to unscrew the knob mounting bracket. After unscrewing the bracket, you can slide the bracket and connecting metal rod downward. Once it is slid down you will want to use a flat-head screwdriver to push the metal tab on the rod outward and the assembly should come apart allowing the vent cover to open all the way. Then you will slide the vent cover to the end that does not have the metal crimped edge on the hinge. The cover will slide off and you can slide the new cover on and re-assemble the vent in reverse order of how you took it apart.

expert reply by:

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>