bing tracking image
Q & A Icon

Recommendations For Complete Re-Wiring Of 6 X 12 Enclosed Trailer With LED Lights

Question:

Want to do a complete rewire. Do you have what i need? Also need to put led wire light on interior, and led bar on outside

0

Expert Reply:

We do have everything you need to re-wire your 6 X 12 enclosed trailer. We also have any of the lights you said you want to use as well.

For trailer wiring I recommend installing a 7-way so you can operate the light inside the trailer. The 7-way wiring I recommend is the Hopkins # H20046. This harness is an 8-ft long molded 7-way.

I then recommend using a junction box like part # 38656. You would mount this on your trailer and then run your # H20046 wiring into the box. You can then run the wiring like part # H20046 from the junction box for the lights on the trailer. The # DW04914-1 wire is sold by the foot.

For the interior light I recommend the Bargman Double Interior Light # 30-76-243. This light has toggle switches to turn the lights on and off.

If you are planning on replacing all of the lights on the trailer you may be interested in a kit like part # TLL56RK. This kit includes all of the hardware and wiring you need to install the lights on your trailer. Since the # TLL56RK kit does not include clearance lights you might want to check out part # MCL31AB.

I have attached a link to our product page for the LED lights we carry for trailers you can check out.

If you have brakes on your trailer you will need # 10-1-1 wire to run from the brakes to the junction box.

If you have any questions about a specific product just let me know and I will be glad to answer any questions for you.

expert reply by:
0
Jeffrey L

Products Referenced in This Question








Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>