bing tracking image
Q & A Icon

Replacement Hub and Brake Assemblies for 3,500 Pound Trailer Axle  

Question:

Have a Dexter 3500 # axle Model #10 with electric brakes with 5 on 4 1/2 bolt pattern. Which drum and brake assemblies will fit my axle.

0

Expert Reply:

Your trailer likely uses bearings # L68149 and # L44649 but you should check them to be sure.

If this is the case I recommend hub and drums # AKHD-545-35-EZ-K if you have E-Z Lube axles with the zerk fitting on the spindle. If you don't have E-Z Lube axles use # AKHD-545-35-K instead. Both kits include the bearings, races, grease seal, grease cap, and lug nuts. They also have a 5 on 4-1/2 bolt pattern like you need.

For brakes you can use # AKEBRK-35-SA. Both the left and right side assemblies are included and they're labeled to make the install easier. These are self-adjusting brakes so they only need to be adjusted when you install them. The mounting bolts are included but you'll also need the nuts and lock washers # BRKH10B.

expert reply by:
0
Charles S
click to enlarge

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>