Recommended Hitch Ball Mount And Hitch Balls For 2015 Ford F-150 XLT  

In regards to the Yakima OverHaul HD Adjustable Truck Bed Ladder Racks, you can purchase the towers part #Y67TR and part #Y47TR and crossbars part #Y95FR separately but not the hardware.

Hey there Vin Gasoline, any relation to Vin Diesel? Anyways, I would check out the etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 4" Drop - 7,500 lbs #e77DR. It sounds like the 4" drop will work for you, but just to…

The Curt Class II Trailer Hitch, part #C12362, is the correct trailer hitch for your 2003 Chrysler Town and Country and the ball mount, part #C45521, is the recommended ball mount for that hitch. It is perfectly safe to turn the ball mount upside…

We had one customer say they didn't use the wedge at all for their 1995 Ford F-250. We've also had customers replace the rubber strip that comes with the #CM11500 with the felt side of velcro to get it to fit better.

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

At this time we do not have a brush or other device specifically for cleaning the terminals in your 7-way connector. I have cleaned the connectors before and it can be quite a task with the limited space inside the connectors. You will need to be…

There are several items you might want to try using for removal of corrosion in your 7-way trailer connector, like part #HM48480. White Vinegar A wedge shaped, slip on pencil eraser or art gum eraser Pipe cleaners PB Blaster If the corrosion is…

To help keep the Adjustable Ball Mount for 2" Hitches #TK5007 snug you'll need an anti-rattle device like the Malone #MPG908 which clamps down or the Let's Go Aero #63232 which uses a block and threaded locking hitch pin. These basically…

There are a few factors that you will need to consider when choosing a trailer hitch for your 1999 Ford F-150 XLT 4x4. First, you will need to know the weight of the trailer or trailers that you intend to pull and the towing capacity of your truck.…

Normally the load in the rear of the towing vehicle is not factored in when measuring for the correct ball mount, because the load might not be the same each time you will be towing. If the load in the rear of your vehicle will be the same amount…

Clearance issues with the collar lock style of trailer couplers are not typical. I'd be inclined to believe the issue is related to the ball mount you have now not having the clearance. We have the Convert-a-Ball adjustable ball mount #TK5007…

The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…