How to Pick Out Roof Vent Lid for 2006 Keystone Cougar M-276 EFS
Question:
I am looking for two replacement parts for our 2006 Keystone Cougar M-276 EFS: 1 Plastic Covers for Roof Vents 2 Side Wheel Trim plastic wheel fenders Both of these have cracked. Thank you.
asked by: Marc L
Expert Reply:
We probably have the correct roof vent you are looking for, but the trim pieces you are looking for aren't going to be something we have. I looked up pictures of your trailer and the fender style that's on the trailer isn't something we carry.
The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent.
If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
Product Page this Question was Asked From
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Continue Researching
- Shop: Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Search Results: 215/60~8
- Video: Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents Feature Review
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: camper vent
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- Shop: Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White
- Shop: etrailer Ratchet Straps w/ S-Hooks and Accessory Bag - 2" x 15' - 700 lbs - Qty 4
- Search Results: straps
- Search Results: chain binders
- Search Results: ventline as 13
- Search Results: ratchet straps
- Search Results: camper vent cover
- Article: How to Install E-Track in 3 Easy Steps
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Shop: CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2" x 6' - 1,167 lbs - Qty 2
- Shop: Trailer Wiring
- Video: An In-Depth Look at the Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Video: ShockStrap Tie-Down Straps Manufacturer Demo
- Video: etrailer Horizontal E Track Spec Review
- Shop: Brake Controller
- Shop: Roof Rack
- Video: Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review
- Shop: Gooseneck Hitch
- Video: Feature Breakdown: etrailer E-Track Backing Plates w/ Hardware
- Shop: Ladder Rack
on RV Vents and Fans
