How to Determine If Trailer Hub AKIHUB-545-2-2K Fits a Trailer Spindle
Question:
I have the Reliable trailer axel model RT2000-236 will the AKIHUB-545-2-2K hub fit this axel?
asked by: Shawn B
0
Expert Reply:
If the axle of your trailer has a 2,000 lb capacity there is a great chance the part # AKIHUB-545-2-2K will fit and work well as a replacement since this hub fits most axles of the capacity. What you can do to be sure is to pull the bearings out of the hub and get the numbers that are stamped on them. If they are both L44649 this hub will fit. The other way to tell is to measure the diameter of the spindle where the bearing rides. If both bearing surfaces measure 1.06 inch on the spindle this hub will work for you.
click to enlarge
expert reply by: Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Trailer Hub that Can Fit on 2,000 lb Axle with 5 on 4-1/2 inch Bolt Pattern
- What Is Hub Length Of Trailer Idler Hub Assembly For 2,000-lb Axles
- Troubleshooting Replacement Hubs Not Fitting Over Detail K2 Utility Trailer
- Idler Hub for 13-Inch Trailer Wheel That Uses L44649 Bearings
- Retainer Nut and Washer Recommendation for Trailer Idler Hub Assembly # AKIHUB-545-2-2K
- Correct Replacement Idler Hub for a 1998 Starcraft Stardust Popup Camper
- Detail K2 Trailer MMT5X7 Hub Replacement
- Replacement Hub Jet Ski Trailer w Spindle that Has 1.06" Diameter for Bearings and 1.5" for Seal
- Replacement Idler Hubs for 1998 Load-Rite 21T3700 Trailer
- Spindle for Trailer Idler Hub Assembly for 2K Axles - 8 to 12 Wheels - 5 on 4-1/2 AKIHUB-545-2-2K
- Upgrading 8 Wheels to 12 Wheels on 1993 Rockwood Pop Up Camper
- Does etrailer Trailer Hub Assembly # AKIHUB-545-2-2K Come Pre-Assembled and Greased
- Are the TruRyde Spindle # TRU59FR and etrailer Idler Hub Assembly # AKIHUB-545-2-2K Compatible
- Grease to Use with Trailer Hub # AKIHUB-545-2-2K that is Pre Packed with Grease
- Replacement Idler Hubs for 4 x 7 Tarter Utility Trailer
- Hub Recommendation with Bolt Pattern 5 on 4-1/2 inch and Fits Spindle with Diameter 1-1/6 inch
- Recommended Replacement Bearing for a Detail K2 Trailer
- How to Find the Right Replacement Hub for a 1997 Coleman Taos Camper
- What Type Of Grease Are The Bearings Packed With On Trailer Idler Hub Assembly # AKIHUB-545-2-2K?
- Replacement Bearing Kit For a Malone LowMax Trailer MPG595
- Replacement Hub Seal for K2 Trailer part # K2MMT5X7
- Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
- Trailer Hubs that Fit 8 x 3-3/4 Inch 5 on 4-1/2 Trailer Wheel # AM20006
- Can Trailer With 2,000 lb Axle Switch From Hub With 4 on 4 to 5 on 5-1/2 Bolt Pattern
- Replacement Hubs for Axle Spindle with 1.06 Inch Diameter
- Replacement Bearings for Malone MicroSport Trailer
- What Hub and Trailer Wheel/Tire can Fit on Spindle LC142161
- Trailer Wheel Hub to Match 2,200 Pound Lippert Spindle
- Is the Trailer Axle with Idler Hubs e82GR Compatible With 12" Wheels and Tires