bing tracking image
Q & A Icon

Bearing Kit Required for 1996 EasyLoader Trailer

Question:

Im looking for bearing kit for my 1996 Easyloader Trailer. Could you tell me the proper part number to order? Thanks.

0

Expert Reply:

Trailer makers do not maintain detailed specs on the smaller items like bearings that are used when fabricating their trailers so the best way to find the correct bearing kit for your 1996 EZ-Loader trailer is to pull one of the hubs and remove its bearings. If you refer to the linked photo you will see the typical placement and appearance of these parts numbers.

If you know the trailer's axle weight rating (often on the main I.D. sticker or identified on the axle itself) you can narrow down the bearings used. For instance, for a 5K axle the bearing part # LM67048 is commonly used.

I have included for you several articles covering bearing replacement and the available bearing grease formulations.

click to enlarge
expert reply by:
0

Product Page this Question was Asked From


Follow up Questions


Beau D.
Need a Hub with these specs (Or the type to search for) 1-1/4" Spindle. (1) inner bearing: LM67048 and (1) outer bearing: LM67048 (1) inner race: 67010 and (1) outer race: 67010 (1) spring loaded double lip grease seal: 15234 (This seal interchanges with: CR: 14972 John Deere: B13294 National: 203013 Transcom: 15234VB Dimensions: Seal ID: 1.5" Seal OD: 2.332" Seal width: 0.406")
Etrailer Expert
Reply from Chris R.

Unfortunately we just don't have any hub assemblies that are designed to fit a 1-1/4" straight spindle like this. This looks to be a unique hub size. Is there any way to contact the trailer manufacturer to see if they might have replacements available or at least resources to where one can be found?

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>