B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Compatibility With 2-1/2 Inch Square Gooseneck  

I do have options for you but the Reese Semi-Custom Base Rail and Installation Kit for 5th Wheel Trailer Hitches part #RP30035-023 will not work in conjunction with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit…

Fifth wheel hitch cover #RP30055 is designed to fit Reese 5th hitch heads (not the whole hitch) but you could use it on a B&W Companion. The cover is roughly 18 by 28 inches and though it is contoured more for Reese hitches you could still use it…

The B&W Companion 5th Wheel Trailer Hitch w/ Slider, #BWRVK3400 is a gooseneck-to-5th-wheel trailer hitch and not suitable for use with a rotating turret type pin box such as the Reese Sidewinder 5th Wheel King Pin with Rotating Turret, #RP34FR.…

Sounds like yesterday you were recommended the use of the Curt 10 inch disc part #16721 with your Curt Q20 fifth wheel hitch and now you want to use the #LC286160 instead. There really is no reason you couldn't use the #LC286160. It has the same…

I do have an option for you but B&W does not recommend using the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter like part #BWRVK3500 with a rotating pin box like the Reese Revolution or Sidewinder even when the turret is locked…

The answer depends on which B&W Companion fifth wheel hitch you have; you never mentioned what truck you have or how the Companion is mounted so l'll use a 2019 Ford F-250 as an example. If you had the factory prep package in your truck, and…

The Reese 10K Revolution pin box is not directly compatible with an adapter like the Convert-A-Ball #CAB-C5GX1216. This is due to the two pivoting points, one at the gooseneck adapter and the other at the turret. You can lockout the Revolution pin…

No, a Sidewinder or Revolution pin box cannot be used with a B&W Companion hitch that fits in the gooseneck ball hole. The problem is that the pivot point on the trailer is locked out at the hitch and moved back 22 inches to the turret on the…

It sounds like you might have the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3500 and are wanting to use it on a 2018 Ram 2500/3500 with Factory Prep Package. If that's the case then you'd need the Replacement…

For a B&W Companion hitch I recommend using a 10 inch diameter lube plate. We have the Reese Lube Plate, #RP83002, which is my top choice, and the Curt 10 inch Fifth Wheel Trailer Hitch Lube Plate, #16721, both of which will work nicely with your…

If you have 8.5 inches of clearance from bed rail to trailer overhang you can lower the head of the hitch by up to 2-1/2 inches to get the nose lower. Also you can raise the pin box in the frame mounts of the trailer and that will lower the nose too.…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…