Replacement Motor for PH-4 Series Ventline Fan  

For the P series of range hoods the replacement motor is supposed to be the part #BVD0218-00. But based on what you said yours looks like you most likely need the part #BVD0278-00. The replacement switch would then be the part #BL0108-02.

The Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 will definitely be the direct replacement for the Ventline PR-4 you are fixing, but the motor housing is not available separately, unfortunately. Below I have all the replacements parts…

To replace just your rooftop condenser unit I recommend the Furrion Chill Replacement RV Air Conditioner #FR42PV. This unit is designed to work with ducted systems, like you currently have, and comes with wiring harness adapter that will make the…

For your Ventline PH4 range hood the replacement filter you need is the part #BCC0246-00 which measures 8 inches by 8 inches.

There are three types of hinges for replacement roof vents: 3 point, 4 point, and continuous. Replacement #BV0534-00 has a closed round hinge, which is continuous. It sounds like you need either a continuous hinge that is not closed such as…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part #BVD0278-00. Then for the fan blade you will need part #BCD0409-00.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…