Question:
I have a 2011 Toyota Tundra with Tow Package. The rubber stops are not mounted on the frame as the illustrations show, rather they are on the spring side held by the U Bolts. Will these need to be removed and is your product still bolted to the frame?
asked by: Mike P
Expert Reply:
You are correct, the installation instructions, see link, indicate that the factory bump stops are held on where the spring U-Bolts are. You will need to loosen the U-Bolts and remove the factory bump stops, then install the Timbren springs, item # TTORTUN4, in the factory location, they will then react when the suspension causes them to touch the frame.
Timbren Rear Suspension Enhancement System
