Can the Handle of the Bulldog Winch # BD155157 be Installed in the Opposite Position
Question:
Can the gearbox be reversed so that the crank is on the rear of the jack, rather than the front? I use a garden tractor to move my trailer around and the tractor sheet metal is very close to the jack. I cant use a top-crank jack, hoping this will solve the clearance problem.
asked by: Scott R
0
Expert Reply:
In order to make the handle face the other way when mounted on the trailer, all you would have to do is mount the Bulldog Jack, # BD155157, so that the handle is facing the way you want. The bolt hole spacing on the jack is evenly spaced, 3 inch a part on center.
The handle itself cannot be mounted in a different position on the jack.
expert reply by:
Jared P
0
Product Page this Question was Asked From
Bulldog Round, A-Frame Jack w/ External Gearbox - Sidewind - 13" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- 13 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Continue Researching
- Shop: Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs
- Shop: Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option - A-Frame - Sidewind - 2K
- Video: A Closer Look at the Ultimate Trailer Jack
- Video: Comprehensive Review: Ultimate Trailer Jack
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: CargoSmart Latching D-Ring Tie-Down Anchor - Bolt On - 3/8" x 2-1/8" - 266 lbs
- Shop: Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
- Shop: Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Travel - 1,000 lbs
- Shop: Replacement Sidewind Handle and Gear Kit for Bulldog Round Jacks - 2,000 lbs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer jack
- Shop: Trailer Hitch
- Video: B and W Companion OEM 5th Wheel Hitch with Slider Installation - 2024 Chevrolet Silverado 2500
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: trailer tires and wheels
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: spare tire mount
- Shop: Fifth Wheel Hitch
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Suspension Enhancement
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: lug nuts
- Search Results: trailer hitch
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire