Length Measurements for EZ Lube Spindle 2.25
Question:
I see the stub length is 3 inches to the back of the brake flange. What is the total length, end to end and from brake flange to the threaded end? Thank you
asked by: Keith
Helpful Expert Reply:
I went out to the warehouse to take some measurements of trailer spindle # TRU37FR for you. The stub is actually 3-3/8 inches from the end to the brake flange. It is 3 inches from the end to where the weld is for the brake flange.
The brake flange itself is a hair under 1/4 inches thick.
The distance from the flange to the tip of the grease fitting is 7-1/2 inches. But to the end of the threaded part it is 7-1/4 inches.
The overall length from tip to tip is approximately 11-1/8 inches. (3-3/8 + 1/4 + 7-1/2.)
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Shop: Agricultural Spindle for 6,000-lb Trailer Axles - 2-3/4" Diameter
- Search Results: trailer bearings races seals caps
- Video: Checking Out the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Bearing Buddy Bearing Protectors Feature Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Search Results: spindle castle nut
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Q&A: What Spindle Fits the Trailer Hub # AKIHUB-655-6-K
- Q&A: Bearing Buddy For A Dexter Trailer Idler Hub Assembly For 6K Axles
- Video: All About the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles
- Shop: Trailer Hitch
- Search Results: 5000 lbs axle
- Search Results: k23~113~00
- Search Results: k08~201~2g
- Search Results: dexter drums
- Search Results: spindle
- Video: Trailer Wiring Junction Box Review
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Article: Where to Position the Trailer Axle?
- Shop: Trailer Wiring
Jorge R.
6/10/2020
Does it fit with Hydraulic Brake Kit Item # AKFBBRK-7 and Trailer Hub and Drum Item # AKHD-655-6-EZ-K