Recommended Draw-Tite Trailer Hitch Receiver Confirmed To Fit 2017 1/2 Nissan Murano  

Question:

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75952 is a confirmed fit for your 2017 1/2 Nissan Murano. I confirmed this with my tech contact at Draw-Tite.

For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118660 also confirmed to fit your vehicle. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your rear cargo area, behind the tail lights on both the driver's side and passenger's side. You will need to remove the rear threshold panel and some interior trim to access the harness. Once you've plugged in the T-connector, find the 1-pin housing that is taped to the tail light harness on the driver's side and plug in the 1-pin connector on the T-One. Locate the fuse box under the hood of your vehicle and insert the provided 15-amp fuse into the 30A location. I've attached a video to assist.

For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black, # BWTS10035B. This will give you a 2 inch and 1-7/8 inch hitch ball as well as give you adjustability to tow a trailer level by offering the 1 inch height adjustments between a 3 inch drop and 3-1/2 inch rise. This ball mount also offers the ability to hide the ball on the backside when not in use to give you a clean look and save your shins when loading cargo in the rear hatch.

You may also want a hitch lock like # e98880 to secure your ball mount or other accessories.

expert reply by: Jason S

0