Replacement Brake Assemblies and Hubs for 2008 Double Tree 5th Wheel Trailer
Question:
Have the above trailer with Axletek drums and brakes and they a bearing burnt up. Need the able double bearing and race for drum, possibly a new drum, and definitely the locking spindle nut. Where does one acquire parts for this Axletek stuff in British Columbia, Canada. Can you replace with any Dexter drum parts instead? Not sure they would even fit this spindle. Do you stock these parts? Drum # is BDX-865-00SZB 070915 ZL 8 x 9/16 studs Brake Assy # is 12-GG B12E-01 electric
asked by: Richard A
0
Expert Reply:
We have the hub you are in need of as part # AKHD-865-8-K and then for the brake assemblies you'd need # AKEBRK-8R for the right hand side and part # AKEBRK-8L for the left hand side.
Our etrailer.com brand axle components are actually rebranded Axletek products.
expert reply by: Jameson C
0
Products Referenced in This Question
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 02475
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Upgrading From 7K to 8K Electric Brake Assemblies on Trailer for Increased Braking Power
- Recommended Trailer Hub To Convert Trailer From 5 Spoke Wheels To 8 x 6.5 Pattern
- Diameter of Hub Bore on the Hub Part # AKHD-865-8-K
- Do 9k and 8k Trailer Hubs Take the Same Dimension Brake Assemblies
- Replacement Wheel Stud for Trailer Hub # AKHD-865-8-K
- 8k Rated etrailer Hub/Drums that Work as Replacement for Dexter 8-285 Hub
- Needing Replacement Brake Drums With 5/8 Inch Wheel Studs on 8,000 Lbs Axles
- Weight of 8 Lug Hub and Drum Assembly for 8,000 Pound Axle
- Replacement Bearings and Seals for Converting 8K Oil Bath Dexter Axle to Grease
- 8,000 lb Electric Trailer Brake Assemblies That Measure 12-1/4 Inch x 3-3/8 Inch
- Trailer Tire and Wheels for Single Axle 8,000 lb Dump Trailer