Locating Replacement RV Vent Lid For 2014 Winnebago View 24M  

Since the standard vent size is 14" x 14" (which is most likely what you have) you simply need to find out what hinge style your vent uses. There are 3 main types of hinges that we carry so I will give you some recommendations for our most…

To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following…

I was able to find you in our records and it looks like you bought the (three point hinge) part #69284 back in 2015 which is discontinued. The new replacement part is #CAM40153.

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

I was able to find a picture of the part number 90110 C1 that you need and found that the exact replacement is the #BV0554-03 that you referenced. If you wanted white instead you'd want #BV0554-01.

To know what hinge type your Heng's Industries Roof Vent Model 122112 has you would need to get up on the roof as the hinge will be visible on the outside. There are four different hinge styles: 3-point, 4-point, metal continuous, and plastic…

Yes by using the Replacement Lid for Ventline and Elixir RV Roof Vents part #CAM40161 you will be getting away from the polypropylene type of covers that comes standard and upgrade to the poly carbonate type. This would be my choice over aluminum as…

Yes, due the the unique design of the MaxxFan Deluxe Roof Vent #MA00-07500K it can be left open while travelling. If you don't have the fan running while it's open the powered lift will close so if you plan on just having it open to vent…

Thanks for reaching out to find an answer, I have linked some information below. **Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke #BV0554-03. **Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19. Vent…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…