Lock Kit Recommendation for Thule T2 Classic Bike Rack

Question

Question:

Since the Thule One-Key System Lock Cylinders - Qty 2 Item # TH512, only comes with 2 cylinders, doesnt that mean 2 keys will be needed One for the T2 classic hitch lock and one for the ratchet bars?

asked by: Sal

0

Expert Reply:

The locking hitch pin of the Thule T2 Classic part # TH9044 or # TH9044-TH9046 comes with a lock core. You'd want the part # TH450200 to give you the two additional lock cores for the arms of the rack and then you'd be set.

expert reply by: Jameson C

0

Answer 1

To add lock cylinders to the ratcheting arms on your Thule T2 Classic 2 Bike Rack #TH9045 or other models of the T2 Classic to secure the bikes to the carrier you will just need part #TH450200, which comes with both cylinders and two keys. Since the…

view full answer...

Answer 2

For your Thule T2 classic the correct hitch pin/lock replacement you'd need is the part #THSTL2 which comes with everything needed. The bolt you mentioned does not fit the T2 so it would not be what you need.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Kin, yes the Draw-Tite Max-Frame #DT28GR will fit your 2023 Toyota Corolla Cross XLE. This hitch has a 2,000 lb weight capacity, a 300 lb tongue weight capacity, and will work great with the Kuat Transfer V2 #KU84FR.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Lock Kit Recommendation for Thule T2 Classic Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching