bing tracking image
Q & A Icon

Will etrailer Jack MJ-1206B or Dutton-Lainson Jack DL22300 Fit a 2x2 Inch Trailer Frame  

Question:

I have a light boat trailer that was homemade and the frame is 2x2 inches. Will this item fit? part # MJ-1206B and # DL22300?

0

Expert Reply:

You would have to bolt Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs Item # MJ-1206B directly to the trailer frame and not use the included brackets to bolt the jack around the frame. A 2x2 inch frame is too small to use the bolt-around brackets. You would need to use the 2 lowest holes in the bracket that is attached to the jack. You will also likely need shorter bolts and matching nuts, obtained locally, to bolt it on. The same goes for # DL22300.

I still recommend using trailer jack # FTJ120W0301. It comes with a bracket that will need to be welded onto the trailer frame (anywhere it touches the frame). This is going to be the best option for you since the frame is too short for a bolt around jack.

expert reply by:
0
Michael H

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>