Question:
I am looking to change out the 4.80-12 on my popup camper. Is the back offset the same? Meaning distance from bolt holes to the edge of the tire. Kenda 205/65-10 Bias Trailer Tire with 10inch White Wheel - 4 on 4 - Load Range D - AM3H410
asked by: Steve T
Expert Reply:
Maybe. The offset is zero and the backspace for the Kenda 205/65-10 Bias Trailer Tire Item # AM3H410 is about or a little less than 4 inches. Another consideration is the width of the tire which is 3-4 inches bigger than your current tires. If you make the change, you will need to make sure you have 1-2 inches of clearance between the new wheels and all of your trailer components inside the wheel well.
If you just need to replace your wheels then you could get a similar wheel like the Kenda Bias Trailer Tire with Galvanized Wheel Item # AM30630. I have also included a link to other selections that are available.
Whatever you decide, make sure to match your wheel with your bolt pattern in order to get the right wheel.
I have linked FAQ articles on bolt patterns and trailer tire sizes that will help.
Links for additional information attached.
Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
