Wiring a Stop/Turn/Tail Light to Molded 7-Way Connector
Question:
How to wire a 7 way molded trailer wire connector H20044 to two stop/turn/tail trailer lights ST21RS ST20RS with two wires protruding. Have 4 wire flex cable for connecting wire.
asked by: Mike K
Helpful Expert Reply:
The Stop/Turn/Tail Trailer Lights # ST21RS and # ST20RS will ground through the mounting hardware, so the two wires will need to connect to the Hopkins 7-Way Molded Trailer Wire Connector # H20044 simply by function. The red wire on the lights is for the tail light function, which is the green wire on the molded connector. The black wire on the lights is for the turn signal and brake functions, which are the red (driver's side) and brown (passenger's side) wires on the molded connector.
Products Referenced in This Question
Optronics Trailer Tail Light - Stop, Turn, Tail - Round - Red Lens - Passenger Side
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 3-7/8 Inch Diameter
- Red
- Optronics
more information >
Optronics Trailer Tail Light - Stop, Turn, Tail, License - Round - Red Lens - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Stop/Turn/Tail
- Round
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 3-7/8 Inch Diameter
- Red
- Optronics
more information >
Product Page this Question was Asked From
7-Way Molded Trailer Wire Connector, 6' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Bolts And Nuts Needed To Mount 12" Brake Assemblies
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
- Q&A: What is the Difference Between 7-Way RV and Utility Trailer Connectors
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Q&A: Do TorkLift Tie-Downs Fit 2024 Ford F-350 With Bed Access Step By Cab