bing tracking image
Q & A Icon

Installing 7-Way Trailer Connector on 2005 Ford E-150 Van  

Question:

Elec. Brakes On my 2005 e150 i have a problem with attaching wires fom rear of van to 7 bladeoutlet to trailer. Is there a plug under van to connect to blue wire or do i splice into harness? I dont know how to send pics

0

Expert Reply:

It sounds like you are needing to install a 7-Way connector at the rear of your 2005 Ford E-150.

If your Ford Van did not come with the factory tow package (with a 7-way connector), then there will not be a built in socket or harness under the vehicle.

If you do not yet have a connector of any type installed, you will want to start with a 4-Way. I recommend the Curt T-Connector Vehicle Wiring Harness # C56020. This is custom-fit for your Ford Van and will install by connecting directly to the built-in ports located behind the driver and passenger side tail lights. I have attached a video demonstration and the written instructions that you can use for reference.

Once you have a 4-Way installed, you will just need the Universal Wiring Kit # ETBC7. This kit will include everything needed to install a fully functional 7-Way from the above 4-Way. I have attached an article that details the installation steps for this kit that you might find helpful. This will provide you with both a 7-Way and 4-Way connector at the rear of your vehicle to connect to the trailer.

If you need a brake controller, I highly recommend the Tekonsha Prodigy P2 # 90885. This is an excellent, proportional controller that will activate the trailer's brakes at the same time and with the same intensity that you apply to them in your vehicle.

expert reply by:
0
Chris R

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>