Adapter Recommendation to Go From Gooseneck Trailer to Fifth Wheel Rails in Truck

Question

Question:

.

asked by: Larry

0

Expert Reply:

So you have a gooseneck trailer and truck with a set of fifth wheel rails installed? Is that correct?

For that we have the part # 16085 which will fit your fifth wheel rails and provide you with a gooseneck ball for the trailer to connect to.

If you have something else going on let me know and I'll see what options we have.

expert reply by: Jameson C

0

Larry

11/7/2017

.

Reply

Jameson C.

11/7/2017

.

Reply

Answer 1

Are you referring to an adapter to tow a gooseneck trailer with fifth wheel rails like the Curt Spyder #16085? If so then yes, the hitch ball is a standard 2-5/16 inch gooseneck ball. If I'm misunderstanding what you're asking, or you have a…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 6

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 7

Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

To add a gooseneck hitch to your 2024 GMC Sierra 2500 with a 6-3/4' bed, I recommend the B&W Custom Underbed Installation Kit item #BWGNRK1020. It has a massive 30,000 lbs capacity and fits both the 6-3/4' and 8' bed lengths. The…

view full answer...

Answer 11

Yes, you do. Since your 2024 Chevrolet Silverado 2500 has the shorter 6-3/4' bed you will need to use a sliding 5th wheel hitch to avoid running into your rear bumper or smashing you back window when turning. I recommend the B&W Companion OEM…

view full answer...

Answer 12

Possibly since you have a 6-3/4' bed but you'll need to take a couple of measurements. I took a look at the nose of a 2024 North Point 310 RLTS. With how low of a profile it has and the kingpin extending out so far you should have plenty of…

view full answer...

Adapter Recommendation to Go From Gooseneck Trailer to Fifth Wheel Rails in Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching