Question:
I have. 2011 Jayco Series Sport 8 popup camper with a basic Ventline VD0433 14” manual roof vent with screen. I would like to be able to fit it with a 12 volt fan without having to install a new vent system. Do you have any suggestions. I could wire it to a plug that could plug into the 12v socket on the ceiling. It could either be a perminant mount or something that hangs off the vent opening, when needed. Thanks,
asked by: Ron D
Expert Reply:
You may be able to add a fan to your Ventline roof vent without removing it but it all depends on what part number you have. I spoke with my contact at Ventline who said that the VD0433 number you gave me is only for the screen on the vent.
If you have the part # V2110SP-24 that has the metal roof then my contact said that there is no way to modify it for a fan.
If you have the part # V2092SP-28 then there is a way that you could add a fan. The Replacement 12V DC Motor # BVD0218-00 and Replacement Fan Blade # BVD0215-00 can be used but the wiring harness and motor bracket are not available so you would need to come up with those parts.
My contact said that part # V2092SP-28 is essentially the same fan as part # V2094SP-28 without the fan. You could purchase part # V2094SP-28 and then use the parts in that vent to add to your current vent setup.
Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents
Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans
Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White