Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V

Question

Question:

Hi, I need to add a trailer hitch to my 2010 Honda CRV. Do the trailer hitches with round frame construction offer great towing capacity/strength over the square frame hitches? Is that what sets the two types apart? Thanks.

asked by: Lynda

1

Helpful Expert Reply:

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame # 24792, feature a square tube design, while the Class III hitches like the Draw-Tite # 75547 have a round crosstube. This crosstube shape may appear to indicate the hitch's strength, as they differ between the two classes, but the design is typically only relevant to the physical appearance of the hitch. A round tube provides a sleeker look and will typically be a bit more hidden than a square bar. The particular design does not necessarily refer to its strength or capacity. There are trailer hitches available (for other vehicles) with a much higher capacity that feature s square crossbar.

For your Honda CR-V, I recommend going with the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75547. This hitch is custom fit for your vehicle and will use existing holes in its frame for a no-drill installation. Even if you do not plan on coming close to the capacities on this higher-rated hitch, the 2 inch receiver opening will open the door for a lot more options if you are looking to use a hitch-mounted bike rack or cargo carrier. The options available for 1-1/4 inch receivers, which is what a Class I hitch provides, are simply more limited.

I have attached the installation instructions and a video on the 2011 Honda CR-V that you can use for reference.

If you are looking to do any towing, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118427. This custom-fit harness is confirmed to fit your CR-V and will install by connecting directly to the existing ports located behind the driver side trim panel. This will provide your vehicle with the 4-Way connector needed to connect with and power the trailer's signal lights.

You will also need a ball mount and hitch ball. I have attached an article that explains how to choose the best one for your setup along with a link that will take you to our available selection. I have also included a couple articles on trailer towing that you might find helpful.

expert reply by: Chris R

1

Answer 1

The 2001 Fleetwood Mallard 26H travel trailer has a specified weight of 5690-lbs so it is likely to have two 3500-lb-rated axles. You can confirm this axle rating by checking the sticker or plate on the axle tube itself, or it could be included in…

view full answer...

Answer 2

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 3

That is a great question. There are three Class III trailer hitches available that are confirmed to fit your 2018 Honda CR-V. As you mentioned, the etrailer.com #e98848 and the Curt #C13397 both feature a square crosstube while the Draw-Tite #76128…

view full answer...

Answer 4

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Since your boat trailer has a 7-way on it currently and has surge brakes what you would want is the 4-way to 7-way adapter part #37185 Kevin. Your 4-way will plug into this and all of the taillight functions of the 7-way will be active. If you also…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver part #C25VR is the same as a U-Hual Trailer Hitch Receiver part CMF13448 and they are both fits for a 2020 Subaru Ascent.

view full answer...

Answer 9

It looks like the connector for the tow package on a 2020 Hyundai Santa Fe is hit or miss (more hit than miss) so you may still have it. You'll be looking for a black connector under and behind the driver's side of the bumper (see attached).…

view full answer...

Answer 10

For the greatest amount of ground clearance, you'd want to use the Curt Class III #C64NR which would provide approximately 12-1/4 inches of ground clearance under the hitch receiver tube. This hitch also has the advantage of being the least…

view full answer...

Answer 11

The etrailer Trailer Hitch Receiver part #C64NR and etrailer Trailer Hitch Receiver part #e98855 are both fits for a 2019 Honda Odyssey (All Models). I recommend the Curt Trailer Hitch Receiver because it will be more hidden once installed. In regard…

view full answer...

Answer 12

You are correct that for your 2022 Honda Odyssey there are a few different vehicle wiring harness options which can make things a bit confusing. The first two harness we will look at are the Tekonsha #118781 and the Curt #C56382. These harness are…

view full answer...

Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching