Do Truck Bed Mats Have the Cutouts for a 2013 Dodge Ram 1500 with the RamBox

Question

Question:

I have a 2013 dodge ram 1500 Ram Box, looking for a bed mat and seen one on your website but I wanted to make sure it comes cut to fit the ram box bed without the cuts for the wheel wells? Thanks

asked by: Tyler

0

Expert Reply:

If you are looking at a mat that only fits your 2013 Dodge Ram 1500 with the RamBox, like the Access # A25040199 for a 5-1/2 foot bed, then it is made to fit the RamBox bed and does not have the cutouts.

expert reply by: Jon G

0

Answer 1

The only rubber mats that we currently carry for a 2012 Ram 1500 are from DeeZee and would both require a bit of trimming in order to fit with your Ram Boxes. If you have a 5-1/2' bed then you would need part #DZ86996 and for a 6-1/2' bed…

view full answer...

Answer 2

I went out to the warehouse to measure the hole spacing on Curt trailer hitch #13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles: 2004 - 2014 Dodge Ram Pickup 1500 Series,…

view full answer...

Answer 3

Both of the hitches you asked about have some great features. They both have dual jaws for better king-pin contact, and both have the same towing and vertical load limit capacity. There are a few differences between the hitches. The hitch height of…

view full answer...

Answer 4

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 5

The Access Custom Truck Bed Mat - Snap-In Bed Floor Cover part #A25040239 that you asked about is designed to work with the new body style Ram 1500. For a second option you can use DeeZee Custom-Fit Truck Bed Mat part #DZ87015. This mat is also a…

view full answer...

Answer 6

I attached a picture that shows the DeeZee truck bed mat #DZ87015 installed in a similar 2019 Ram 1500 as yours. You can see that it matches the contours of the truck bed well and the only trimming is at the front of the mat and for gooseneck hitch…

view full answer...

Answer 7

For a rubber bed mat that fits your 2021 Ram 1500 5-1/2 foot bed with Ram Boxes we have the DeeZee truck bed mat part #DZ87015 as a confirmed fit that would work well. It does require some trimming to fit with the Ram Box according to DeeZee.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Do Truck Bed Mats Have the Cutouts for a 2013 Dodge Ram 1500 with the RamBox

Product Page this Question was Asked From

Continue Researching