Recommended Towing Package for a 2007 Honda Accord
Question:
Good Day, I have a 2007 Honda Accord with the 4 cyl.. I also have need to transport a washer and dryer. I think the motor will handle it bit do you offer a bolt on hitch? I would look for a light 5x7 trailer as a platform. Thank You for any help
asked by: Kenn L
Expert Reply:
For your 2007 Honda Accord, I recommend taking a look at the Draw-Tite Sportframe Trailer Hitch Receiver part # 24787. This hitch has a Class I rating with a 1-1/4" receiver tube opening. The maximum gross trailer weight (GTW) and tongue weight (TW) this hitch can handle is 2,000 lbs and 200 lbs respectively. This is the only trailer hitch receiver that we have confirmed to fit your vehicle that does not require drilling for installation and is completely bolt-on. I have also attached an installation video of this hitch installed on a similar 2005 Honda Accord for you as well.
Since you will be towing a trailer, you will also need a wiring harness and ball mount/hitch ball. For a wiring harness I recommend using the Custom Fit 4-Pole Flat Trailer Connector part # 118302 for 4-door models or the Curt part # C59236 for 2-door models. I have also attached an installation video of a harness installed on a similar 2006 Honda Accord for you as well.
For a ball mount/hitch ball, most of our customers have used the Draw-Tite Drawbar for 1-1/4" Hitch part # 3592 without issues. This ball mount has a 2-1/8" rise and a 2-3/4" drop. If this rise/drop does not work for you then please use the attached article to find the correct one. You will also need a hitch ball and part # 19256 for 1-7/8" couplers or part # 19258 for 2" couplers would work well for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: 2 inch diameter ball trailer hitch ball
- Shop: Trailer Wiring
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Replacement Hub for a Haul Master Kit Trailer with 30205 Bearings
- Search Results: safety cables
- Search Results: curt custom fit vehicle wiring
- Search Results: wire harness
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer wiring
- Search Results: 2" tow ball
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Shop: Hopkins Active Tail Light Converter with Install Kit
- Video: DIY 2005 Honda Accord Installation for the Draw-Tite Sportframe Trailer Hitch Receiver
- Video: Mount: Draw-Tite Sportframe Trailer Hitch Receiver on a 2006 Honda Accord
- Video: 2003 Honda Accord Draw-Tite Sportframe Trailer Hitch Receiver: Complete Installation
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Ultimate Overview of the No-Drill Mount for Electrical Mounting Bracket
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Finding the Right Trailer Wiring Harness
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
on Trailer Hitch
