Can a Reese Weight Distribution Shank be Used with a Curt Weight Distribution Head
Question:
How close are the specs for using reese shanks with curt trunnion tow equipment? Or does it really matter?
asked by: David F
0
Expert Reply:
In terms of compatibility, it depends on which components of a weight distribution system you are referring to. For example, Curt spring bars will not fit in a Reese head nor will Reese bars fit in a Curt head. But, if you are talking about the shank, a Curt or Reese head will fit each others shank. The holes on a Reese shank, # RP3344, are spaced the same as those on a Curt shank; 1-1/4 inches on center.
expert reply by: Michael H
0
Video/Article/FAQ this Question was Asked From
Article or VideoSimilar Expert Q&A Pages
- Drop Shank for Reese Mini Weight Distribution Hitch
- How to Choose the Correct Weight Distribution Shank Rise or Drop
- How to Determine the Correct Drop for a Weight Distribution Shank
- Weight Distribution Shank Doesn't Have Enough Drop To Tow Trailer Level
- Difference Between Reese RP3344 and Curt C17124 Weight Distribution Shanks
- What is the Longest Weight Distribution Shank Available
- Weight Distribution Shank with Longer Than 12 Shank
- Choosing Weight Distribution Shank with the Correct Rise or Drop
- Weight Distribution Shank For Truck With 6-Inch Lift Using Equal-I-zer Weight Distribution
- Weight Distribution Shank With the Most Drop for Trunnion Bar System
- Weight Distribution System Drop Recommendation for Lifted Trucks
- Recommended Drop Weight Distribution Shank for Use with a EAZ Elite Weight Distribution System
- Longer Weight Distribution Shank, Timbren Springs and Straptek Sway Control for 2014 Ram 2500
- How To Choose New Weight Distribution System Shank for Lifted Truck
- Is Shank Compatible with Reese Strait-Line Weight Distribution System
- Is Sway Control Needed with a Weight Distribution System
- Drop Dimensions of 11 Inch Weight Distribution Shank # RP3215
- Drop Shank Recommendation for Weight Distribution System Used with Lifted Jeep Rubicon
- Can Reese Weight Distribution Adjustable Shank Be Used With Fastway Weight Distribution System
- Can 2 Inch Weight Distribution Shank be Used in 2-1/2 Inch Trailer Hitch Receiver on 2016 Ram 2500
- Reese Weight Distribution Shank # RP3344 Recommendation for a 2001 Dodge 2500 Quad Cab
- Reese Weight Distribution Shank Recommendation for a System That Needs 6-1/2 inches of Drop
- What is the Diameter of the Bolt Holes on Reese Weight Dist Shank # RP3344
- Reese Weight Distribution Shank Recommendation for 7 inches of Drop
- Correct Weight Distribution Shank to Provide 1-1/2 Inches of Drop
- Is Reese Weight Distribution Shank # RP3344 Compatible with SteadiFlex WD System
- Recommended Weight Distribution Shank for Truck and Trailer 9" Apart
- Recommended Weight Distribution Shank for Horse Trailer With Total Weight of 6,900 lbs
- Will Reese Weight Dist Shank Bolt Hole Spacing Match Up with Older Head Unit