Amperage Rating of Deka Wire  

Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is…

That is a valid question. We strongly recommend people use 10 gauge wire like the part #10-1-1 (sold by the foot), but we realize that there are a lot of people who get by with 12 gauge wire. There are several variables with trailer brake wiring that…

The Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long #TRFA73Z916DLNZ is a grade 5 bolt. Your setup as described is a standard setup for leaf spring hangers and double eye leaf springs. The #166081 is made by the same manufacturer…

For bolts that do not have the zerk fittings we have the #007-003-01 you can use and then for never fail bushings you could then use the part #TRBU11566. These parts aren't available in a kit.

For brake assembly wiring, we recommend either twelve gauge wire #12-1-1 or ten gauge #10-1-1 due to the length of the wiring and the amperage required. Both of these options are sold by the foot. You will connect one end to the junction box using…

I do have some info for you but there isn't a torque spec for shackle bolts like the Shackle Bolt for 1-3/4" Wide Double Eye Springs part #007-003-01. Instead, you'll want to tighten the nut for the bolt until snug and then back it off a…

If you have a round 3" diameter axle on your Spartan boat trailer then you are going to want to use the CE Smith U-Bolt Kit part #CE23003 which contains u-bolts that are 7" long x 3-1/8" wide x 3/8" diameter. The reason you need…

So starting with the question about weight, since you have 5,200 lb axles, go with the 5,300 lb leaf springs, or even 6,000 lb leaf springs would be okay, but I do not recommend going with springs rated less than the axle capacity. The number of…

Thank you for all that info, and replacing the equalizers, as well as upgrading the suspension hardware is going to be the best option for you. The correct size equalizer, as well as the suspension kit that I recommend is the following: - Curved…

For the axle U-bolts, we have two different options: - 3" Round Trailer U-Bolts 9/16" Diameter #SP01-080 - 3" Round Trailer U-Bolts - 1/2" diameter #SP01-060 Since these bolts are so close in diameter, I recommend measuring the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…