Question:
I want to put this hitch on my new 2018 Camry. I would like to have the hitch schematic with dimensions so I can determine clearance to ground. I purchased my last 2011Camry hitch through etrailer and it worked out great. I hope you can forward the information. Thank You
asked by: David C
Expert Reply:
Draw-Tite 1-1/4-inch Class II hitch # 36643 is a confirmed fit for the 2018 Toyota Camry and it also fits the hybrid version. In a separate email I have sent along the install instructions from Draw-Tite.
Since we have this hitch in stock I went to our warehouse to measure it for you so you can determine the resulting ground clearance after installation. I measured from the top of the rear mounting brackets (that bolt to the bottoms of the frame rails) down to the bottom edge of the receiver tube. That dimension is 8-1/4-inches as shown in the linked photo I prepared for you.
If you need a wiring harness you can use part # 118763 and for a ball mount part # 36071. If you are going to use the hitch for a bike rack or other hitch-mount accessory be sure to select a 1-1/4-inch Class II type, such as Thule bike rack # TH934XTR and Cirt cargo carrier # C18145.
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
