Does Replacement SpeedLink Mounting Hardware # 7521241001 Need Additional Install Hardware  

I went out to the warehouse and pulled an Thule #XADAPT8 kit, an M6 barrel nut, and a regular M6 nut. I tested all the parts together and found what I think is the problem you are having. The bolts are M6 bolts but they are fine threaded. You are…

I reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier #7521241002 and the 13 mm #7521241001 is the length of that center bolt/screw. You…

Your picture didn't make it through but the replacement hardware for the Thule Snow Pack #7521241001 that you referenced was designed to adapt the older Snow Pack carriers to fit the aero style bars like what you have so this would work for you.

You may be able to use the Thule SpeedLink Mounting Hardware Assembly #7521241001 by modifying your older generation Thule Ski Carrier 91725. However, I cannot recommend you drill the rivets out as not only will this automatically void your warranty…

You'd want the shorter 13 mm Speedlink you referenced for your Thule Snowpack with the part #7521241001 that you referenced.

I checked with Thule and for your Thule SnowPack Extender part #TH7326B the correct replacement Speedlink is the part #7521241001 which is the 13 mm assembly.

For your Thule Snowpack #TH7326 the correct SpeedLink replacement is the part #7521241001 which is the 13 mm model. The 20 mm model part #7521241002 is same thing but with taller mounting stud. You might measure to be sure but yours SHOULD use the 13…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…